✅【Specification】: Dimensions: 7.87 x 4.13 x 2.55in; Power: 3000W; Rated Frequency: 60HZ; Rated pressure: 0.4-1.2mpa; Temperature: 30-55; Water pipe interface: G 1/2″ interface; Installation wire diameter: 1.5-2.5mm² copper wire. Please verify it’s the right size for you before purchase. ✅【Provide Endless Hot Water】: Electric Water Heater changes cold water into hot water, which can take advantage of the thermal energy maximally, so you can get steady stream of and fresh hot water for daily life. ✅【Premium Material】: This Tankless Water Heater adopts stainless steel material, which is , easily solves issues such as face washing, bathing, vegetable washing and dish washing; Freely adjust water temperature by water , simple operation. ✅【Wide Application】: Compact size and lightweight design, high practicity and convenient installation, install this tankless hot water heater under your sink to provide hot water right where you need it, widely used at kitchen, rest room, bathroom or any other places. ✅【Practical and Beautiful】: Lightweight mini electric water heater with LCD digital temperature display, a combination of inner quality and classical appearance, adds an exquisite and practical furniture for your home. Q: I’m encountering the following issues: 1. There’s no hot water. 2. The water outlet or inlet is leaking. 3. An E1 error code is displayed. 4. An E2 error code is displayed. 5. An E3 error code is displayed. 6. What does it mean when the fault code appears like a running horse lamp? A: 1. If there’s no hot water, it could be because cold water isn’t passing through the heater, or the water pressure is low, or the inlet is blocked. Wait for the cold water and use under normal water pressure. Clean the inlet filter. 2. If the shower hose or hose seal is leaking, reconnect or replace it. 3. If an E1 error code is displayed, the temperature might be skewed. Turn off the heater and let cold water pass for a while. 4. If an E2 error code is shown, it could indicate a leakage. Please contact customer service. 5. An E3 error suggests a temperature probe fault. Please contact customer service. 6. If the fault code is appearing like a running horse lamp, it means the device isn’t starting. Adjust the water pressure to 0.04MPa. If it still can’t start, you’ll need to disassemble the water heater.
Electric Tankless Water Heater, 110V 3000W Mini Electric Tankless Instant Hot Water Heater Bathroom Kitchen Washing
$33.11
Out of stock
Description
Features: Thisis a water heater for the application of changing the cold water intohot water and it will meet your various needs such as used in kitchen,bath room, public restroom, etc. It is a high efficient water heater with compact size to produce the hot water very quickly. LCD digital temperature display. Freely adjust water temperature by water flow, simple operation. Safe heater, electricity saving, water saving, no pollution, no exhaust gas. Stainless construction with mini design, it is durable, elegant and fashionable. Specifications: Material: Stainless Steel Shell Color: Black, Golden, Red(optional) Power: 3000W Current: 25-32A Voltage: 110V Rated Frequency: 60Hz Rated Pressure: 0.4-0.6Mpa Waterproof Grade: IPX4 Temperature: 30-55℃(Considering the use environment in severe cold areas may not reach the maximum temperature of 55℃) Installation wire diameter: 1.5-2.5mm² copper wire Water pipe interface: G 1/2″ interface Size: Approx. 20 x 10.5cm / 7.87 x 4.13inch Package Included: 1 x Water Heater 2 x Fixing Screws 2 x Screws Protector 1 x Manual Note: 1. Please note this item should get the water first and then link the electricity when installing. 2. You’d better install this item vertically to make sure long service time. 3. Please kindly make a note if you need any adapter. 4. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard. 5. The temperature control of the water heater is controlled by the amount of water inlet. The larger the inlet water , the lower the temperature, and the lower the inlet water , the higher the temperature. 6. As the space of the inner tank of the water heater is relatively small, when the water is closed, the remaining temperature of the water in the inner tank is still rising. Turn on the water again, the temperature will be warmer, after a few seconds the temperature stabilizes again. 7. The heating of the product is adjusted by the water regulating valve or the faucet switch, the temperature is low when the water is large, and the temperature is high when the water is small. Therefore, it is recommended that the product be washed in winter for hands, dishes, face, etc. Note: 1. No cold water passes through the water heater, the water is low or the water inlet is blocked. Wait for cold water, use under normal water pressure, clean the inlet filter. 2. The shower hose or hose is improperly sealed. Reconnect or replace other hoses. 3. Temperature deviation. Turn off the water heater and let the cold water pass through for a while. 4. Electric leakage. First go to check if there is no problem with the wiring in the home, such as to see if there is a ground wire, if there is no ground wire, connect the ground wire to see if the leakage will disappear. 5. Running lamp: The equipment is not started, ① water pressure is adjusted to 0.04MPa.② still can not be opened to open the water heater
Additional information
| Brand | Fyydes |
|---|---|
| Color | WHITE |
